Recent Commercial Posts

Duct, Duct, Mold!

7/20/2021 (Permalink)

Dust out from Air Duct Keep your air ducts clean.

When Was The Last Time You Had HVAC Cleaning Done In Your Building?

Part of managing indoor air quality means managing mold. Mold spores are traveling through the air searching for moist environments where they will grow into colonies. You are aware of those places where mold likes to grow and you regularly search your building in Belgrade, MT for leaky pipes as well as rain and flood damage. You search the usual places, like bathrooms, kitchens, and basements. You can't see any mold, yet you still smell that familiar musty smell. Is that a coincidence that the odor is stronger when the air conditioner is running? 

Odorous Digestive Gases

You are actually smelling gases from the digestive process of mold. Those gases, called mycotoxins, are not produced by all molds. Production depends on the type of mold and the substance being consumed. Cleaning vents regularly can help your indoor air quality, prevent the spread of spores, and help you find hidden mold in the heating and air system.

Mold Inside HVAC Systems

What does mold have to do with your HVAC? Microscopic spores travel through the air, including inside your HVAC system where moisture and condensation are often by-products. Mold spores only need a hospitable place to rest, digest, and reproduce. Here are some places to check for mold growth during HVAC cleaning:

  • Air ducts
  • Supply and return registers
  • Cooling coils
  • Drip pans
  • Porous building materials near the HVAC system

Don't forget to change the filter regularly to help your system run efficiently and to keep microscopic spores contained.

When There's a Problem

If you do smell mold, or even see it during routine HVAC cleaning, you can rely on specialists to help find and resolve any mold problems. During cleanup, they use special containment techniques and HEPA air scrubbers to prevent the further spread of mold spores in your building.

Is There Extra Flood Protection Available for a Commercial Building?

7/14/2021 (Permalink)

Commercial Insurance Commercial insurance is an important part of owning a property.

What You Can Do To Protect Your Property

Is your commercial building in Manhattan, MT, ready for potential floods brought on by storms? While no one wants to deal with flooding, having a commercial insurance policy that helps pay for some of these damages can make you sleep easier at night. However, not all commercial policies cover every source of a flood. Use this quick guide to better understand what you can do to protect your property.

Learn About Your Policy

Call your insurance provider today to learn about your current flood policy. Many commercial coverages are limited by the source of the water, but it does depend on your unique policy and where you get your coverage. Some may even have a coverage cap. Depending on your insurance provider, you may have to work with a special commercial damage repair team after a storm affects your space. As you learn about your policy, you may find that you're not as covered as you thought.

Consider the National Flood Insurance Program

Thankfully, you may be able to get extra coverage from outside of your insurance provider to supplement your commercial insurance. The NFIP is offered through the Federal Emergency Management Agency to help business owners stay on their feet after a disaster. The NFIP offers the following benefits:

  • Helps pay for structural damage.
  • Damaged items are assessed before payout to ensure you get a fair price.
  • Has different deductibles available to better fit your needs.

The extra flood protection from FEMA can give you peace of mind during storm season. As you learn more about the program, you may find out that you can get a building property and personal property coverage. This allows you to protect every aspect of your business if needed.

Commercial insurance is an important part of owning a property. Unfortunately, even with an insurance policy you may still be liable for some of the damages caused by storms on your own. Adding extra protection through FEMA can give you peace of mind.

Dealing With Roof Damage After a Commercial Fire

6/8/2021 (Permalink)

Roof damaged in a commercial building Commercial roof damaged

One of the more noticeable forms of damage you might notice in your Ball Place, MT, commercial building after the fire cleanup efforts is roof damage. You might be curious about how it occurs, especially if the fire was not large enough to collapse the building. Continue reading to learn more about what causes fire roof damage and some short-term and long-term solutions for it.

Causes of Roof Damage

A fire can affect your business's roof in multiple ways. For instance, if you use asphalt shingles on your roof, they can melt overexposure to the strong heat. Even a fire in a neighboring building can cause this damage. The destruction of the rafters and other structures underneath can also destabilize the roof and open some holes above. One more cause for roof damage takes place during fire rescue and cleanup. Firefighters may break open the roof to easily access the house, extinguish flames and save people.

Short-Term Solutions
Once the fire is extinguished and the insurance company has assessed the damage, the emergency restoration team will handle the fire cleanup and repair. Since the process might take a significant amount of time, they might offer tarp services as a short-term solution. Some of the benefits include:

  • Additional structural support
  • Prevention of human trespassing
  • Protection against animal intrusion
  • Blockage of elements like wind and water

These circumstances can increasingly damage your property and delay the reconstruction efforts. A tarp-protected roof meaningfully improves the building's situation.

Long-Term Solutions
Along with the renovation of the property, you should prioritize fixing the roof. You will need to talk to roof repair specialists who work with commercial buildings. Select the best company for the task by considering local reviews, prices and the qualifications and experience of the crew. Ensure you have the best people for the job.
Sometimes a commercial fire can result in a damaged roof. Make sure that both temporary tarp and a permanent fix are applied during the fire cleanup and repair.

Common Indoor Molds and How to Tell Them Apart

1/26/2021 (Permalink)

Moldy wall Mold spores may be everywhere

Mold spores may be everywhere, but that doesn’t mean you want them growing in your Bozeman, MT, business. Along with black mold, this fungus comes in an array of colors and textures, as well as toxicity levels. Before diving into mold cleanup, it is good to have some knowledge on the common types of mold and what they look like.

Common Molds

While there more than 100,000 types of mold, including edible mushrooms, not all of them are able to thrive indoors. Below are four of the most common molds that may be lurking in your building.

Alternaria: It is often olive green or brown and gray. This velvety fungus finds its way in from the outdoors. There are more than 40 species of this variety.
Aspergillus: Although it may come in different colors, it is often black with white or yellow underneath. Its long spores make it easy to form thick layers on surfaces.
Cladosporium: Able to grow in warm and cool conditions, it is velvety and typically green or brown. It often starts as small spots that come together to create large patches.
Stachybotrys: Frequently called black mold, this greenish-black variety has a slimy texture and thrives on paper, dust and lint. It often makes an appearance after a flood or when humidity levels are very high.

Call the Experts
When you first see mold, it's best to call in a mold remediation and restoration company to properly remove the problem. Along with having the right tools, they will have extensive knowledge of the different types of molds and how to remove them. Unfortunately, mold is often detected via smell rather than sight. When that happens, an indoor environmental professional can conduct a test to determine the type and extent of the hidden problem.
While black mold may be the most talked about, many varieties can flourish indoors. Regardless of the type, quickly addressing the problem is important.

3 Benefits of Using the Same Contractor to Perform Remediation and Reconstruction Services

12/30/2020 (Permalink)

Contractor inspecting building damaged by fire Rely on your contractor to choose the right people for the various restoration and remediation jobs

Here Are The Many Benefits Of Finding A Full- Service Contractor

If you hire one fire mitigation and restoration company, you can avoid a lot of hassle. When you first start searching for a contractor in Ball Place, MT, this can seem like a mythical superhero. However, digging a little deeper will give you full-service contractors. The contractor you find may not be able to fix all of the issues associated with fire damage. However, they will be able to plan and coordinate with others who can help get the job done.


1. They Know the People
Instead of relying on random recommendations on social media, you can rely on your contractor to choose the right people for the various restoration and remediation jobs. They can create a team quickly and often cheaper than you would be able to on your own. Additionally, having the same person throughout the entire process will make it easier for the company to work with your insurance adjuster.


2. There’s No Need to Be a Middle Man
When you have more than one company doing the remediation and reconstruction, you serve as the middle man. With only one company, you don't have to worry about handling this responsibility.


3. They Understand the Entire Scope of the Project
When one contractor does the fire damage remediation and another does the reconstruction, there is a communication gap. In some cases, it won't make a difference, but it could lead to problems, less efficiency, and higher costs in others. Having one contractor do everything will ensure that nothing is overlooked and gives you peace of mind.
You want to have one company do the fire damage remediation and reconstruction. This gets the project taken care of quickly and without extra problems or costs. It also saves you the hassle and lets you focus on getting your business up and running again.

3 Ways To Avoid Commercial Water Damage

12/23/2020 (Permalink)

Plumber with a clipboard writing down Plumbing inspections should take place on a yearly basis

Ways To Avoid Commercial Water Damage

Water damage is one of the most common commercial property insurance claims, with average amounts in the range of $10,000 to $17,000. Reduce the risk of leaking pipes or unexpected breaks by scheduling inspections and maintenance of plumbing, roofing and appliances at a building in Manhattan, MT.

1. Inspect Plumbing
A broken pipe is a common cause of water damage in commercial structures. Inspections can address wear, damage or a lack of installation that make pipes more likely to burst.
Plumbing inspections should take place on a yearly basis. Pipe materials may last two or more decades, but some materials are more likely to degrade. Replace old polybutylene lines with pipes made of more reliable plastic or metal materials.

2. Maintain Roofing
Beyond leaking pipes, roof damage is another cause of leaks that may be forestalled by timely inspection and maintenance. Check the condition of roofing after severe storms and trim back overhanging trees on a seasonal basis, as falling limbs are an easily preventable cause of potentially major damage.
Commercial roofing is designed with several layers. Heavy impact or progressive damage tends to be necessary for water to permeate through roofing materials and reach the interior of a building.

3. Check Appliances
Appliances that use water to function such as dishwashers and washing machines are also potential causes of a pipe break. A toilet backup, loose or worn appliance connections or faulty shut-off valves could cause leaks that spread damage across one or more floors of a building.
Periodic plumbing inspections may identify faulty hardware or leaking pipes that can be replaced to keep water damage from occurring. Regular inspections and maintenance of all structural systems can reduce the risk of large-scale water damage at a commercial property in Manhattan, MT. Water damage and emergency plumbing repairs tend to be far more costly than these preventative measures.

Four Expensive Mistakes Property Owners Make Regarding Water Damage

11/7/2020 (Permalink)

Rusty burst pipe spraying water after freezing in winter. Leaking or broken pipes are the primary ways that water causes damage to commercial buildings

Avoid Making These Common Mistakes

Most commercial property insurance policies don’t cover water damage that is due to ordinary wear and tear; in other words, damage that should have, or could have, been prevented through routine property maintenance. Avoid making these common mistakes, which can negate your coverage.

1. Failing to Properly Inspect and Maintain Pipes
Leaking or broken pipes are the primary ways that water causes damage to commercial buildings. Inspect all pipes and connections regularly and replace any parts that are worn or leaking. Damage from a slow leak won’t be covered if the insurance adjuster determines that you should have discovered the leak sooner.

2. Letting Gutters and Downspouts Become Clogged
Leaves, twigs, and other debris tend to accumulate quickly in gutters and downspouts. When they can’t effectively route water away from your building, a heavy rainfall can cause water to get backed up and enter the building. Insurance won’t cover your claim if it was caused by your failure to keep gutters or downspouts clear.

3. Trying To DIY Water Cleanup
Building owners sometimes try to clean up water damage themselves, but if any water remains, it could lead to mold growth and even structural weakness. Insurance won’t cover any damage that results from an incomplete initial cleanup effort. To be safe, always contact a professional water restoration company to handle the cleanup, as this ensures that there will be no lingering moisture or future damage.

4. Not Insulating Outside Pipes
Freezing temperatures can cause pipes to burst, and a burst pipe can cause a lot of damage in a short time. Most insurance policies specify that it’s your job to insulate any exterior pipes to protect them from freezing. Failing to do so could mean paying for all that damage yourself.
These mistakes can result in your insurance claim being denied, leaving you to pay for the costs of water damage repair and restoration. To make sure you’re covered, stay on top of maintenance and enlist professional help when necessary.

5 Tips for Salvaging Belongings from Mold Damage

10/12/2020 (Permalink)

When it comes to cleaning mold in Bozeman, MT, you may be wondering if a professional mold remediation service can do anything to help salvage your belongings and clean and restore your home. Fortunately, the answer in many cases is YES! Here are our tips if you’re trying to salvage your personal items from mold damage.

1. Talk to a Professional

If you have water damage in your home, mold remediation steps may be necessary to salvage your belongings. Contacting a professional is the first step to successfully get everything back in order. Our experts have the knowledge and equipment necessary to get the cleanup and restoration process started.

2. Sort Your Belongings

Different methods of cleaning are required for different material types. Once you have identified mold damage, sort your belongings by material type. This will significantly increase the efficiency of the cleaning and restoration process.

3. Follow Cleaning Recommendations

When cleaning up mold, it is always best to follow any cleaning recommendations. If you choose to tackle this task on your own, always double check the manufacturer’s cleaning instructions on any cloth or upholstery to prevent additional damage. If you are unsure, we are always here to help!

4. Keep Cleaned Items in a Mold-Free Zone

After you have cleaned exposed items, it is important to store them in an area that is not being treated for mold. This will help prevent further contamination from mold spores.

5. Take Steps to Prevent Further Mold Growth

After your home and belongings have been cleaned and restored, it would be wise to take steps to prevent further mold growth. Setting a regular schedule to inspect for water damage, installing a drainage system, or adjusting your landscaping to slope away from your home will certainly give you peace of mind that you are doing everything you can to prevent mold from growing and causing further damage.

Mold damage is unpleasant to deal with, but is highly preventable. Should you find yourself faced with mold growth, or damage to your property or belongings, rest assured that our professional mold remediation experts in Bozeman, MT are here to help!

Does Your Home Have Mold?

9/27/2020 (Permalink)

If your home or property has recently experienced water damage in Bozeman, Montana, you should keep an eye out for signs of mold. There are several ways to determine if mold is growing in your home. It doesn’t take a lot of effort to investigate for mold, especially if growth is visible. If you smell a mildew odor, but do not see any visible evidence of mold, you should contact an indoor environmental specialist to schedule a mold inspections as soon as possible.

Follow these three simple steps to find out if your home or property has mold:

1. Visually inspect areas where water damage has occurred for signs of mold. Growth is most likely to develop in areas of high humidity or moisture. Examine these areas for evidence of mold growth, being careful not to disturb any colonies, as this may expose you to mold or cause spores to spread throughout your home.

2. If you smell a moldy or musty odor, but see no visible signs of mold, contact an indoor environmental specialist. Do not attempt to search for hidden mold on your own, especially if your search would require you to peel back wallpaper or make a hole in your wall. It is always best to leave invasive searches to our certified mold remediation experts, to protect yourself and prevent the problem from intensifying.

3. Have a mold test performed by our certified professionals. Professional testing is the best method for determining what (if any) type of mold is present. We are then able to provide the appropriate combination of containment, removal, cleaning, and disinfection necessary to eliminate the issue.

If you discover mold in your home, detailed information can help you determine the best options for remediation. Contact our certified specialists in mold remediation in Bozeman, MT to find out more about your mold cleanup options.

Steps You Should Take After a Fire

4/12/2020 (Permalink)

Red Firetruck Details of the Side and of the 911 telephone Sign Call 911 and report the fire

You may think you could never experience a fire in the workplace. Unfortunately, such an emergency is not outside the realm of possibility. To protect yourself, your co-workers, and equipment and supplies at work, it's important to be prepared for disasters. Before fire restoration can take place, you need to do your part to stay safe.

Make the Right Calls

If you have implemented a fire escape plan, you have a greater chance of safely evacuating the building. Once you and everyone get out, you need to do the following:

  • Call 911 and report the fire.
  • Call our fire insurance company to file a claim.
  • Get in touch with a professional fire cleanup company to start the rebuilding process.

Be Careful in the Building

Though you may have personal belongings and important items in the building, you should not enter unless firefighters or disaster cleanup authorities tell you it's safe. Once inside, let the crew handle the fire restoration. In the meantime, don't touch any damaged materials. Doing this poses a safety hazard to you. Plus, you could do further harm to the item. Restoration technicians in Big Sky, MT, have the skills and equipment to salvage many damaged pieces of equipment and materials. If you disturb any of these, it may hinder this restoration process.

Ensure That the Building Is Secure

During smoke cleaning and other fire cleanup processes, the fire mitigation company should board up windows and gaps in the building. This will keep out the elements and protect your building from additional damage. These efforts will also discourage vandalism inside the office and will prevent unauthorized people from breaking in. If there is roof damage, the restoration company will provide tarp services to cover the roof.
Make sure you follow these tips before and during fire restoration. You can do your part to help this process go smoothly so you can return to the workplace.